HP 3500 - Manual (Page 42)

Configure device menu
The configure device menu allows you to change or reset the default print settings, to adjust
the print quality, and to change the system configuration and I/O options.
Printing menu
These settings affect only jobs without identified properties. Most jobs identify all of the
properties and override the values set from this menu. This menu can also be used to set
default paper size and type.
Menu item Values Description
COPIES 1–32,000 Allows you to set the default
number of copies. The default
number of copies is 1.
DEFAULT PAPER SIZE A list of available sizes appears. Allows you to set the default
paper size.
DEFAULT CUSTOM PAPER
SIZE UNIT OF MEASURE
X DIMENSION Y DIMENSION
Allows you to set the default
size for any custom job without
dimensions. Available for
Tray 1.
DUPLEX OFF
ON
Allows you to enable or disable
the duplex function (automatic
2-sided printing). The default is
OFF. You can override this
setting in the printer driver.
Available for the HP Color
LaserJet 3700dn and 3700dtn
printer models.
DUPLEX BINDING LONG EDGE
SHORT EDGE
Allows you to choose whether a
duplex job will be flipped on the
long edge or the short edge.
OVERRIDE A4/LETTER NO
YES
Allows you to set the printer to
print an A4 job on letter-size
paper when no A4 paper is
loaded, or to print a letter-size
job on A4 when no letter-size
paper is loaded. The default is
NO.
MANUAL FEED ON
OFF
The default is OFF. Setting it to
ON makes MANUAL FEED the
default for jobs that do not
select a tray. You can override
this setting in the printer driver.
30 Chapter 2 Control panel ENWW