HP 3500 - Manual (Page 72)

Controlling print jobs
In the Microsoft Windows operating system, three settings affect how the printer driver tries to
pull paper when you send a print job. The Source, Type, and Size settings appear in the
Page Setup, Print, or Print Properties dialog boxes in most software programs. If you do
not change these settings, the printer automatically selects a tray using the default printer
settings.
CAUTION To avoid affecting print jobs of other users, make printer setup changes through the software
application or the printer driver whenever possible. Printer setup changes made through the
control panel become default settings for subsequent print jobs. Settings selected in the
software or the printer driver override settings selected in the control panel.
Source
Printing by Source means you choose a specific tray from which you want the printer to pull
paper. The printer tries to print from this tray, no matter what type or size is loaded in it. If you
choose a tray that is configured for a type or size that does not match your print job, the
printer does not print automatically. Instead, it waits for you to load the tray you chose with
the type or size of paper for your print job. If you load the tray correctly, the printer begins
printing. If you press , the display allows you to choose other trays.
Note If you have difficulties printing by Source, see Priority for print settings .
Type and Size
Printing by Type or Size means you want the printer to pull paper from the first tray that is
loaded with the type or size that you choose. Selecting paper by type rather than source is
similar to locking out trays and helps protect special paper from accidental use. (However,
selecting the Any setting does not enable this tray lock-out function.) For example, if a tray is
configured for letterhead, and you specify the driver to print on plain paper, the printer will not
pull the letterhead from that tray. Instead, it will pull paper from a tray that has plain paper
loaded and is configured for plain paper on the printer control panel. Selecting paper by type
and size results in significantly better print quality for heavy paper, glossy paper, and
transparencies. Using the wrong setting can result in unsatisfactory print quality. Always print
by Type for special print media, such as labels or grayscale transparencies. Always print by
Size for envelopes.
● If you want to print by Type or Size and the trays have not been configured for a certain
type or size, load the paper or print media into Tray 1. Then, in the printer driver, select
the Type or Size from the Page Setup dialog box, the Print dialog box, or the Print
Properties dialog box.
● If you often print on a certain type or size of paper, the printer administrator (for a
network printer) or you (for a local printer) can configure a tray for that type or size. See
Using the embedded Web server (hp color LaserJet 3700 series printer only) or
Configuring trays for type and size. Then, when you choose that type or size as you print
a job, the printer pulls from the tray configured for that type or size.
● Every time Tray 2 or the optional Tray 3 is closed, a message appears prompting you to
choose a Type or Size for the tray. If the tray is already configured correctly, press to
return to the Ready state.
60 Chapter 4 Printing tasks ENWW