Hoshizaki MODULAR CUBELET SERENITY SERIES FS-1022MLH-C - Manual (Page 6)

6
For FS - Continued
• To reduce the risk of electric shock, do not touch the plug or power switch with
damp hands.
• Do not use a unit with a damaged power cord. The power cord should not be
altered, jerked, bundled, weighed down, pinched, or tangled. Such actions
could result in electric shock or fire. To unplug the unit, be sure to pull the plug,
not the cord, and do not jerk the cord.
• Do not place fingers or any other objects into the ice discharge opening.
For SRC
• Electrical connection must be hard-wired and must meet national, state, and
local electrical code requirements. Failure to meet these code requirements
could result in death, electric shock, serious injury, fire, or severe damage to
equipment.
• The remote condensing unit requires an independent power supply of proper
capacity. See the nameplate for electrical specifications. Failure to use a
properly sized breaker or fuse can result in a tripped breaker, blown fuses, or
damage to existing wiring. This could lead to heat generation or fire.
• THIS UNIT MUST BE GROUNDED. Failure to properly ground the remote
condensing unit could result in death or serious injury.
• Lockout/Tagout to prevent the power supply from being turned back on
inadvertently.