Harman Stove Company PB 105 - Manual (Page 50)

3-90-07205R19_05/13
Quick Reference (
Auto-
light )
1 T
urn Mode Selector to OFF
.
2 Use heat exchanger cleanout rods to clean the heat exchanger
tubes.**
3 Scrape the air holes in the burnpot.** 4 Fill the hopper with pellets. 5 T
urn Feed
Adjuster to “T
est”.*
6 Check the Combustion Blower and Feeder Motor for operation.* 7 T
urn Feed
Adjuster back to the #4 setting.
8 T
urn the MAX T
eMP
dial to the desired temperature.
9 T
urn MIN T
eMP
dial to the desired settings.*
10 Flip the igniter switch to
Auto.*
The boiler will ignite if the temperature of the boiler water is less than the temperature set on MAX T
eMP
dial..
*See the section on Operation for information about Manual
lighting and
emergency Power
.
**See the section on Maintenance for more details about cleaning.