Setting the metronome function, Setting the metronome function (“click ?” menu), Turn the [jog] dial to select “on” or “off – Fostex D2424 User Manual
Page 111: Press the [execute/yes] key, Flashing
111
Model D2424 Reference Manual (Changing the Initial Settings <SETUP mode>)
Flashing
Setting the Metronome function (“Click ?” menu)
“Setting the Metronome function” menu allows you to determine whether or not the recorder outputs a
metronome sound from Real track (track 24) during playback or recording.
Turning the Metronome function on enables you to record your performance while playing the instrument
accompanying the metronome sound.
<Notes>
* The metronome sound is output from track 24 in the D2424.
* When the metronome function is switched ON, the metronome sound cannot be recorded on the
output track nor can the recorded sound be played back. However, in a D2424 formatted in
96kHz/24bit (8 track) or 88.2kHz/24bit (8 track), as the metronome sound will be output from
track 24, real tracks1-8 can all be used for record / playback.
• Initial setting:
[Off]
• Option:
[Off], or [On]
* You can turn the function on and off for each Program individually.
* The settings cannot be saved and loaded as part of the song data.
* The settings are maintained after you turn off the power to the recorder.
Setting the Metronome function
1.While the recorder is stopped, press the [SETUP]
key to enter SETUP mode.
2.Turn the [JOG] dial to select “Click ?” (“?” flashes.),
then press the [EXECUTE/YES] key.
The current setting (“Off” or “On”) appears on the
display.
Pressing the [
EXECUTE/YES
] key lights up the flashing
“?” character steadily; the current setting flashes.
The initial setting is “Off” as shown below.
3.Turn the [JOG] dial to select “On” or “Off”.
Selecting “On” will enable the output of the metronome
sound. Selecting “Off” (initial setting) will disable the
metronome output.
4.Press the [EXECUTE/YES] key.
The display shows the selection (On or Off), then returns
to the indication in step 2.
To cancel the setting operation, or to exit SETUP mode
after storing data, press the [STOP] button or the [EXIT/
NO] key. Each time you press one of these keys, the
recorder returns to the previous hierarchy level of the
menu, and finally exits SETUP mode.
∞
42
OL
0
30
24
18
12
9
6
3
kHz
24
FS
BIT
SETUP
24
∞
42
OL
0
30
24
18
12
9
6
3
23
22
21
20
19
18
17
16
15
14
13
12
11
10
9
8
7
6
5
4
3
2
1
CLOCK
INT
∞
42
OL
0
30
24
18
12
9
6
3
kHz
24
FS
BIT
SETUP
24
∞
42
OL
0
30
24
18
12
9
6
3
23
22
21
20
19
18
17
16
15
14
13
12
11
10
9
8
7
6
5
4
3
2
1
CLOCK
INT