Fostex D2424 - Manual (Page 142)

142
Model D2424 Reference Manual (MIDI Implementation Chart/MMC List)
32 4F (<edit message>): track exchange status reply
This is the reply against the "12 4F" track exchange command.
33 3E (<edit message>): product new program status reply
This is the reply against the "13 3E" product new program
command.
33 41 (<channel> <channel>): digital in channel status reply
33 41 (<channel=7F> <count> <mmc track>): adat in status re-
ply
This is the reply against the "23 41" digital in ch. st. request.
The first <channel> indicates the track number assigned to the
L channel of the digital audio signal (S/P DIF) from the DATA
IN connector, and the second <channel> the track number as-
signed to the R channel. If digital in is set to "Adat," the reply
for the first <channel> will be 7F and then <count> <mmc
track>, in this order. In the <mmc track>, the track bit map
which is the Adat input, is expressed by "1" (In this equipment,
the track actually locked is expressed as “1”).
33 42 (<channel> <channel>): digital out channel status reply
33 42 (<channel=7F> <channel=00>): adat out status reply
This is the reply against the "23 42" digital out ch. st. request.
The first <channel> indicates the track number assigned to the
L channel output of the digital audio signal (S/P DIF) from the
DATA OUT connector, and the second <channel> the track
number as signed to the R channel output. If digital out is set
to "Adat," the reply for the first <channel> will be 7F and that
for the second <channel> will be 00.
33 43 (<program>): program status reply
This is the reply against the "23 43" program status request.
<program> indicates the presently operating program num-
ber.
33 44 (<on/off>): click status reply
This is the reply against the "23 44" click status request.
It indicates the on/off setting of the metronome function.
33 45 (<count=10><level data>): level status reply
This is the reply against the "23 45" level status request and it
indicates the present track 1-16 output level data.
In D2424, as level data is updated 40msec., it will be effective if
inquiry is made in 40msec. units.
33 46 (<on/off>): bar/beat resolution status reply
This is the reply against "23 46" bar/beat resolution status
request.
33 47 (<midi sync>): midi sync out status reply
This is the reply against "23 47" midi sync out status request.
33 48 (<MTC offset mode>): MTC offset mode status reply
This is the reply against "23 48" MTC offset mode status re-
quest.
33 49 (<count=3> <on/off> <vari data>): vari pitch status reply
This is the reply against "23 49" vari pitch status request and is
indicating the vari pitch function on/off and the present vari
pitch setup figure.
34 01 (<signature map>): signature map status reply
This is the reply against "24 01" (<event number>) signature
map request. The signature map of the event indicated by the
<event number> is replied. If there is no event specified (Ex-
ample: Such as when <event number=5> is requested even
though there is only 5 meters registered), it will be replied with
all figures at 00 of the <signature map>.
34 02 (<tempo set map>): tempo set map status reply
The reply against "24 02"(<event number>)tempo set map re-
quest. Tempo set map of the event indicated by the <event
number> is replied. If there is no event specified (Example:
Such as when <event number=20> is requested although only
10 is setup for tempo), it will be replied with all figures at 00 of
the <signature map>.
34 04 (<mmc time>): preroll set map status reply
This is the reply against "34 04" preroll time status request
and this is replied with the presently set preroll time.
34 05 (<mmc time>): remain time reply
This is the reply against "24 05" remain time request, and is
replied with the recordable disc remaining time.
34 06 (<frame rate>): frame rate status reply
This is the reply against "24 06" frame rate status request, and
is replied with the presently set frame rate.
34 07 (<fs rate>): fs rate status reply
This is the reply against "24 07" fs rate status request, and is
replied with the presently set fs (sampling frequency).
34 08 (<time base>): time base status reply
This is the reply against "24 08" time base status request, and
is replied with the presently set time base (in the display).