Fostex D2424 - Manual (Page 98)

Model D2424 Reference Manual (Saving and Loading Song Data)
98
If you create a new program and you go to the save
menu, a “
p01 ” indication appears if nothing is saved on
the disk. The program number flashes if there is data
already saved on the disk.
If data is saved on a backup disk, you can turn the [ JOG ]
dial to select existing program numbers, in addition to
“
New PGM ”, or even select “ Eject ”.
Select and save an existing program. The current data
saved will be erased and overwritten with the new data
being saved. ALWAYS select “
New PGM ” if you do not
want to overwrite (erase) any existing data.
Select “
Eject ” to eject the disk then press the [ EXECUTE/
YES ] key.
The menu to select the program range appears by
selecting “
Save All? (**/**) ”.
6. Select either “New PGM” or an existing program
number. Then press the [EXECUTE/YES] key.
The save process starts. The REMAIN counter (size to
save) starts counting down. (The following is an example
of saving data to backup number “
p01 ”.)
When the data is saved “ COMPLETED! ” lights up on the
display. Then the system escapes from the SETUP mode.
If you are saving data on more than
one DVD-RAM disk ,
the first disk is ejected when data is saved on it, then a
message prompting “
Set Second Disk ” appears on the
LCD.
Follow the instructions and set the next disk in the DVD-
RAM drive. The data is automatically saved on the
second disk.
7. When all the data that you want to save are saved, press
the [EXIT/NO] key (or [STOP] key) to turn off the
“COMPLETED!” message.
“ Save All ” refers to saving all programs from the very
first program to the very last program.
By turning the [
JOG ] dial at this time, you can select
program number 01, 02... all the way up to the current
program number.
Loading in the FDMS-3 Mode
1. Press the [SETUP] key while in the initial menu, to go
to the SETUP mode.
2. Turn the [JOG] dial to select “Load PGM?” (“?” flashes).
Then press the [EXECUTE/YES] key.
The menu to select the loading device appears.
“
SCSI ” is the default setting and the indication flashes.
∞ 42
OL
0
30
24 18
12
9
6
3
kHz
24
FS
BIT
SETUP
24
∞ 42
OL
0
30
24 18
12
9
6
3
23 22 21 20 19 18 17 16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1
CLOCK
DIGITAL
INT
∞ 42
OL
0
30 24
18
12
9
6
3
kHz
24
FS
BIT
SETUP
24
∞ 42
OL
0
30 24
18
12
9
6
3
23 22 21 20 19 18 17 16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1
CLOCK
INT
“ IDE2” + “Device Name ” appears. Then the menu to
select the program to load appears.
You can select the “ Load All (**/**) ” choice in addition to
individual backup programs by turning the [ JOG ] dial
at this stage. “ Load All (**/**) ” refers to loading all
programs that are saved.
You can set the program range to load, as in the case
with “Save” mentioned earlier, by executing the “
Load
All (**/**) ” feature.
The following display appears if you select “ Load All (**/
**) ”, then press the [ EXECUTE/YES ] key. Now you can
set the range of the program to load (you can load the
programs in the similar way as the programs were
“Saved”, as described earlier.)
Flashing
Flashing
Flashing
∞ 42
OL
0
30
24
18
12 9
6
3
kHz
24
FS
BIT
SETUP
24
∞ 42
OL
0
30
24
18
12 9
6
3
SURE?
23 22 21 20 19 18 17 16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1
CLOCK
INT
∞ 42
OL
0
30
24
18
12
9
6
3
kHz
24
FS
BIT
SETUP
24
∞ 42
OL
0
30
24
18
12
9
6
3
23 22 21 20 19 18 17 16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1
CLOCK
INT
Flashing
∞ 42
OL
0
30
24
18
12
9
6
3
kHz
24
FS
BIT
SETUP
24
∞ 42
OL
0
30
24
18
12
9
6
3
23 22 21 20 19 18 17 16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1
CLOCK
INT
∞ 42
OL 0
30
24
18
12
9
6
3
kHz
24
FS
BIT
SETUP
24
∞ 42
OL 0
30
24
18
12
9
6
3
23 22 21 20 19 18 17 16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1
CLOCK
INT
∞ 42
OL
0
30
24
18
12
9
6
3
kHz
24
FS
BIT
SETUP
24
∞ 42
OL
0
30
24
18
12
9
6
3
23 22 21 20 19 18 17 16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1
CLOCK
INT
∞ 42
OL
0
30
24
18
12
9
6
3
kHz
24
FS
BIT
SETUP
24
∞ 42
OL
0
30
24
18
12
9
6
3
23 22 21 20 19 18 17 16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1
CLOCK
INT
Flashing
Load the data that you saved on you backup E-IDE
hard disk (or optional DVD-RAM).
Data is loaded from the “
Load PGM? ” menu in the
SETUP mode as in the case when S/P DIF and adat
digital signals were loaded or when loading data on
SCSI devices.
3. Turn the [JOG] dial to select “IDE2”. Now “IDE2” is
flashing. Press the [EXECUTE/YES] key.
If, for example, you choose 01 as illustrated in the case
above, you can save all programs. If you select 03 you
can save the programs from program 03 to the last
program.