Fostex D2424 - Manual (Page 60)

60
Model D2424 Reference Manual (Cue & Review Function)
Cue & Review Function
This chapter explains how to use the “Cue & Review” function with the [ REWIND ] button, the [ F
FWD ] button, and the [ SHUTTLE ] dial, and also explains “ Digital Scrubbing ” with the envelope function.
During Cue/Review and Digital Scrubbing you will hear the sound recorded on the disk, which
makes it easy for you to swiftly locate the desired point without failure while listening to the
sounds.
The prerequisite of the following operation is that the time base is ABS, however, the operation can
be executed in any time base. To execute this function with a non-ABS time base there is a need to
priory switch over to the desired time base.
Cue & Review function using the [REWIND] and [F FWD] buttons
You may cue & review the audio data at five-times speed while the recorder is playing.
1. Press the [PLAY] button to play the audio data.
2. Press the [F FWD] button during playback.
This cues in the forward direction at five-times speed.
The PLAY LED and F FWD LED lights up while cuing is
taking place.
3. Adjust the monitor sound of the track to monitor on the
mixer.
4. Press the [PLAY] button again to restore the original
play back speed.
5. Press the [REWIND] button instead of the [F FWD]
button.
This cues in the rewind direction at five-times speed.
The PLAY LED and REWIND LED lights up while cuing is
taking place.
6. Press the [PLAY] button to restore the original playback
speed.
Cue & Review function using the [SHUTTLE] dial
You can use the [ SHUTTLE ] dial for +1~-7 times or -1~-8 times
1. Press the [PLAY] button to start playback.
2. Turn the [SHUTTLE] dial clockwise during playback.
The forward direction cue speed variates from +1~ -7
times speed depending on the degree (angle) of turning
the dial. PLAY LED flashes and F FWD LED lights up
during the cue process.
3. Adjust the monitor sound of the track to monitor on the
mixer.
4. Let go of the [SHUTTLE] dial to return to normal play
speed.
5. Similarly, turn the [SHUTTLE] dial counterclockwise
during playback.
The rewind direction review speed variates from -1~ -8
times speed depending on the degree (angle) of turning
the dial. PLAY LED flashes and REWIND LED lights up
during the review process.
6. Let go of the [SHUTTLE] dial to return to normal play
speed.
Digital scrubbing using the envelope function
You may perform digital scrubbing using the “ Envelope Function ” of the recorder while the recorder
is stopped. The envelope function allows digital scrubbing for each track recorded. The display
will show the envelope indication of the track selected.
POWER HOLD
RECORD STOP PLAY REW F FWD
ALL INPUT ALL READY
LOCATE REC END
VARI PITCH PUNCH LOCATE REHEARSAL
TAKE
RECALL STORE
EXIT/NO EXECUTE/YES PGM SEL
NEXT PREV UNDO/REDO
PREVIEW
EDIT SETUP
AUTO RTN
OUT IN AUTO PLAY START OUT IN END
17-24 ACCESS 9-16
1/9/17 2/10/18 3/11/19 4/12/20 5/13/21 6/14/22 7/15/23 8/16/24
FOOT SW
LOCATE ABS 0 CLIPBOARD PLAY
AUTO
TRACK SHIFT
SHIFT
DISP SEL
CHARACTER
TIME BASE SEL
P.EDIT
EJECT
ENVELOPE
CHASE
TC READY TC GEN M.UNDO
TRACK SHIFT
PREV TC NEXT TC
RECORD TRACK
CLIPBOARD AUTO PUNCH
AUTO RTN
LOCATE MEMORY
24bit 96kHz
OPTICAL
24TRACK DIGITAL RECORDER
1, 4 5
2
1