Saving the data using scsi, Connecting a scsi device, Caution – Fostex D2424 User Manual

Page 91: Output input output, Input, Scsi terminator scsi cable removable scsi drive

Advertising
background image

Model D2424 Reference Manual (Saving and Loading Song Data)

91

75

WORD

OUTPUT

INPUT

OUTPUT

DATA

16 - 9

24 - 17

8 - 1

100

RS422

THRU

AC-IN

INPUT

16 - 9

24 - 17

8 - 1

SCSI

ON OFF

REMOTE

MIDI

INPUT

THRU

OUTPUT

1

2

3

4

5

6

7

8

1

2

3

4

13

14

15

16

5

6

7

8

17

18

19

20

9

10

11

12

21

22

23

24

NE PAS OUVRIR

CAUTION

AVIS:

RISQUE DE CHOC ELECTRIQUE

WARNING:

TO REDUCE THE RISK OF FIRE OR ELECTRIC
SHOCK, DO NOT EXPOSE THIS EQUIPMENT
TO RAIN OR MOISTURE.

ANALOG INPUT BALANCE [ +4dBu ] / UNBALANCE [ -10dBv ]

ANALOG OUTPUT BALANCE [ +4dBu ] / UNBALANCE [ -10dBv ]

ON OFF

DATA

MIDI

WORD

SCSI

REMOTE

ANALOG OUTPUT BALANCE [ +4dBu ] / UNBALANCE [ -10dBV ]

ANALOG INPUT BALANCE [ +4dBu ] / UNBALANCE [ -10dBV ]

SCSI terminator

SCSI cable

Removable

SCSI drive

Saving the data using SCSI

This procedure will SAVE/LOAD using a removable SCSI drive disk (zip, MO, DVD-RAM etc.) that is
a backup disk. In save/load using SCSI, the program can be selected separately or in whole.
A backup purpose SCSI disk is generally used after formatted in the backup format, however, a DOS
formatted (computer format) SCSI disk can also be used to SAVE/LOAD in WAV.
Data saved in WAV can be re-loaded and even directly be read by the computer. Therefore, this
kind of data can be used as music software, as well.

Connecting a SCSI device

Refer to the diagram to connect a SCSI device to a D2424.

<Notes on connection>

• Before making connections, make sure that both the recorder and the SCSI drive are turned off.

• One SCSI drive may be connected on the recorder.

• The SCSI connector on the recorder is a half pitch 50-pin connector compatible with Macintosh computers.

Use a cable with connectors that conform to the standards for connecting a SCSI drive.

• The SCSI drive should be terminated. Install a SCSI terminator, or turn the termination switch to “on” if the

drive has a termination switch (like a zip drive).

• You must format the SCSI disk after you connect it to the recorder. Refer to the “Formatting” section on the

next page for the formatting procedure.

D2424

SCSI connector

(Half-pitch 50-pin)

<CAUTION>

In using a removable disk for backup purpose, be sure Write Protect is disabled. Please note that it
cannot be used in the Write Protect mode.

Advertising