Introduction – Frymaster 8195916 User Manual
Page 15
3–1
CHAPTER 3
DIGITAL CONTROLLER OPERATING INSTRUCTIONS
5
6
7
8
4
3
1
2
ITEM DESCRIPTION
1
Lighted Display – LED display for a full-pot fryer or the right side of a split-pot fryer.
2
Lighted Display – LED display for the left side of split-pot fryer.
3
On/Off Switch – Either switch controls a full-pot; on split-pot fryers, each switch controls
the frypot on its respective side.
4
C/F Switch – Toggles the display between Fahrenheit and Celsius on a full-pot fryer, or
the right side of a split-pot fryer.
5
Temperature/Setpoint Display Switch –Toggles the display between frypot temperature
and setpoint temperature on a full-pot fryer, or the right side of a split-pot fryer.
6
Up Arrow – Raises setpoint temperature on a full-pot fryer, or the right side of a split-pot
fryer.
7
Down Arrow – Lowers the setpoint temperature on a full-pot fryer, or the right side of a
split-pot fryer.
8
Melt-Cycle Cancel Switch – Cancels the melt-cycle mode of a full-pot fryer, or the right
side of a split-pot fryer.
INTRODUCTION
The Digital Controller allows the operator to program the frypot setpoint and to toggle the display
between the frypot temperature and the programmed setpoint. The setpoint is an operator-
determined frying temperature. When the controller is turned on, it automatically brings the cooking
oil/shortening to the setpoint and maintains it at that temperature until the controller is turned off.
Units manufactured for export to CE countries display the frypot temperature by default. Units
manufactured for other than CE countries display the setpoint by default. This controller also
features a programmable melt-cycle cancel switch and a switch for toggling the temperature display
between Fahrenheit and Celsius.