Frymaster 8195916 - Manual (Page 22)

5-2
The Thermostat Controller requires no programming – the operator has only to set the thermostat
knob to the desired cooking temperature. However, the controller does require calibration by a
factory-authorized servicer from time to time, normally every six months.
On fryers equipped with basket lift timers, pressing the button in the center of a timer causes the
associated basket lift to lower the basket into the frypot. At the end of the prescribed cooking time,
the timer will raise the basket from the frypot. The cooking time is set by rotating the timer knob
clockwise until the index mark indicates the desired cooking time.
Although mounted on the same control panel, the basket lift timers are totally independent of the
controller.