FUJITSU ScanSnap S510 - Manual (Page 251)

8.2 Cleaning the Scanner Exterior
ScanSnap S510 Operator's Guide
231
Da
ily
Ca
re
8
8.2 Cleaning the Scanner Exterior
Clean the scanner exterior and the stacker with a cloth moistened with a small amount of Cleaner
F1 or any neutral detergent.
ATTENTION
• Never use paint thinner and other organic solvents.
• During the cleaning, prevent water or moisture from getting inside the scanner.
• Do not use aerosol sprays to clean the scanner. Aerosol sprays cause dirt and
dust to enter the scanner, resulting scanner failure and malfunction.
• It may take long before the cleaner vaporizes if a large quantity is used. When
cleaning the scanner parts, dampen a cloth with modest quantities of the
cleaner. In addition, wipe off the cleaner completely with a soft lint-free cloth to
leave no residue on the surface of the cleaned parts.
Cloth
Cleaner F1 or
neutral detergent
Paint thinner