FUJITSU ScanSnap S510 - Manual (Page 71)

3.3 Loading Documents
ScanSnap S510 Operator's Guide
51
Using the ScanSnap
3
3. Adjust the side guides to the document width.
Move the side guides so that there is no gap between the document edge and side guide on
both sides. Doing so can eliminate skewing of the document during scanning.
HINT
When you use the stacker, scanned document sheets are stacked on the
stacker in the collated order when they have passed through the ScanSnap.
Use the stacker as described below.
1. Pull out the stacker toward you.
2. Extend the stacker.
Document
Side guide
Stacker