41 using the scansnap – FUJITSU ScanSnap S510 User Manual

Page 61

Advertising
background image

3.1 Flow of Operations

ScanSnap S510 Operator's Guide

41

Using the ScanSnap

3

4. Press the [SCAN] button

on the ScanSnap.

⇒

The scanning is started.

⇒

The power indicator (lamp) on the ScanSnap blinks blue during the scanning operation.
The following window appears to indicate the scanning status.

HINT

•

By default, documents are scanned in "Duplex" mode when you press the
[SCAN] button. In the "ScanSnap Manager - Scan and Save Settings" dialog
box, you can switch the scanning mode of the [SCAN] button to "Simplex"
mode.

•

Scanning can also be started by using the ScanSnap Manager icon

on

the task bar.
For details about this operation, refer to section "4.1 About the ScanSnap
Icon" (page 64)
.

ATTENTION

•

Do not connect or disconnect other USB devices during the scanning
operation.

•

Do not close the paper chute during the scanning operation.

•

Do not switch the user to log in during the scanning operation.

S

S

Advertising