FUJITSU ScanSnap S510 - Manual (Page 65)

3.1 Flow of Operations
ScanSnap S510 Operator's Guide
45
Using the ScanSnap
3
■ Finishing Scanner Operation
Exiting ScanSnap Manager
Operation
When you do not want ScanSnap Manger to stay resident on your computer, right-clicking the
ScanSnap Manager icon on the task bar, and select "Exit" in the Right-Click menu to exit
ScanSnap Manger.
Disconnecting the ScanSnap
Operation
1. Close the paper chute to turn off the ScanSnap.
⇒
The ScanSnap Manager icon on the task bar changes to the inactive state .
2. Disconnect the USB cable from your personal computer.
3. Disconnect the Power cable from the power outlet.
HINT
If you exit ScanSnap Manager, you can no longer use the ScanSnap.
To activate ScanSnap Manager again, from the [Start] menu, select [All
Programs]
[ScanSnap Manager] [ScanSnap Manager].
HINT
The ScanSnap is turned on/off in conjunction with the personal computer or
opening/closing of the paper chute. Ordinarily, you can forget about turning on/
off the ScanSnap being connected to the personal computer.
S S
S S