FUJITSU ScanSnap S510 - Manual (Page 85)

4.1 About the ScanSnap Icon
ScanSnap S510 Operator's Guide
65
Setting the ScanSnap
4
■ Right-Click Menu
This menu appears when the ScanSnap Manager icon is right-clicked.
In this menu, you can perform the following:
Item Function
Duplex scan Both the front and back sides of the document are scanned at the
same time. Scanning is performed according to the settings
configured in the "ScanSnap Manager - Scan and Save Settings"
dialog box.
Simplex scan Only one side of the document is scanned at one time. Scanning
is performed according to the SCAN Button Settings.
SCAN Button Settings The "ScanSnap Manger - Scan and Save Settings" dialog box
appears.
Settings configured in this dialog are used when scanning is
performed with a [SCAN] button press.
⇒
Refer to "4.2 Changing Scanning Settings" (page 67).
Use Quick Menu You can switch between the Quick Menu Mode and Left-Click
Menu Mode by marking/clearing this.
You can select an operational mode that is enabled upon
scanning with a [SCAN] button press.
⇒
Refer to section "3.1 Flow of Operations" (page 30).
Profile Management The "ScanSnap Manager - Scan and Save Settings" dialog box
appears.
You can edit profiles.
⇒
Refer to "4.3 Saving Scanning Settings" (page 92).
Show scanning results A message appears after scanning to inform you of the scanning
results, whether blank pages are removed (page 81) and/or the
orientation is changed (page 82).
Check consumable
supplies The "Check consumable status" dialog box appears.
Reset consumable counters to 0 after you replace consumables.
Refer to section "9.1 Replacing Consumables" (page 238).
Help You can view the Help topics, the version information of
ScanSnap Manager, and the "Preferences" (page 113) and Online
Update (page 251) dialog boxes.
Exit You can exit ScanSnap Manger.
S S