FUJITSU C150-E146-02EN - Manual (Page 18)

1-6
Button
/ LED Function
Name of the button Function
and LED
Button Next Displays the next screen.
Previous Displays the previous screen.
Moves cursor to the left.
Moves cursor to the right.
Exit • When you are entering settings on the operator panel, pressing this button
immediately returns you to the “Scanner Ready” screen.
Enter Records parameter currently selected by cursor.
Send To/ Operational only when Manual start mode is set or “Read” lamp lights;
Start starts the reading when video interface option is used. Some of application
Softwares Use this button.
Stop • When “Check” LED lights, pressing this button releases error status (turn
off “Check” and returns to “Scanner Ready” screen).
Operational only during reading operation; stops the reading when video
interface option is used.
Also turns off “Check” lamp.
LED Indicates that the scanner is ON.
Read Indicates that the scanner is reading or ready to read.
Check • If it lights, means that an alarm occurred. Pressing “Stop” button turns
“Check” lamp off.
• If it blinks at one second intervals, means that a jam or double feed has
been detected. With jammed paper, removing the jammed paper turns off
“Check” lamp. With a double feed, pressing “Stop” button turns off “Check”
lamp.
• If blinks at four seconds intervals, means that cleaning the ADF is
necessary.