FUJITSU C150-E146-02EN - Manual (Page 75)

7-3
(Continued)
No Item Description Selectable Default
parameters
12 SCSI terminator Select the SCSI terminator ON/OFF.
setting
13 Low Power Mode Change the default setting of the duration
setting for power save.
14 Select Interface Select the interface when the scanner has
a board in the Third Party Slot.
15 Display TPS Board Display the ID number of the board in the
ID Number Third Party Slot.
* This offset refers to the difference from the value adjusted by automatic offset adjustment.
** Some restrictions apply to the detection of a double feed.
ON/OFF ON
5min. 15min.
to 60min.
Auto/SCSI/TPS Auto