FUJITSU C150-E146-02EN - Manual (Page 52)

4-3
CAUTION
As there is always an off chance a document may be damaged using the
ADF, important original documents should never be fed through the ADF.
Instead, read manually in flatbed mode.
NOTICE
When scanning a translucent document, set the density to light mode.
NOTICE
Carbonless papers have a chemical composition that damages the Pad and Pick roller. Therefore, note
the following:
Cleaning: If miss pick occur frequently, clean the Pad and Pick roller in accordance with the
“Cleaning and Maintenance” manual.
Replacement of parts: The life of the Pad and Pick roller may be shorter than if PPC paper documents
are fed.
NOTICE
• The leading edge of all documents fed by ADF should be straightened so the curl of the paper
meets the specifications shown below:
Less than
3 mm
Feed direction
Feed direction
Less than
5 mm
Top of the paper
More than
30 mm
Read surface
Read surface
More than
30 mm