FUJITSU C150-E146-02EN - Manual (Page 93)

GL-7
Temporary Error
An error correctable by the operator.
Terminator
Devices with a SCSI interface can be daisy-chained. A resistor that includes terminal circuits needs to
be placed at both ends of a cable when devices are daisy-chained. If a device (such as a scanner) is the
last device in a chain, leaving an interface connector unused, a Terminator theerfore must be attached
to provide those terminal circits.
Third Party Interface
Optional board provided by Fujitsu or interface board provided by a third party can be installed and
used.
Time-out limit
This is the time the scanner waits for next document insertion after the last document feeding. The scanner
returns Paper Empty when no document is set after time-out limit.
TPS
Third Party Slot.