FUJITSU C150-E146-02EN - Manual (Page 42)

3-6
A B
C
D
(For portrait mode)
A B
C
Top
Paper Preparing
• Place the documents face down, with the top to the left as shown in A. (The long side is the top for
landscape mode and the short side is the top for portrait mode.)
• Holding both ends with both hands, lift the documents.
• Hold the documents tightly with your left hand and bend them as shown in B.
• Grip the documents tightly with your right hand, loosen the grip of your left hand, and straighten as
shown in C.
• Even up the feed edge of the batch of the paper as shown D.
NOTICE
• Reduce the butch size of the documents if double feed or miss-pick occurs.
3
Adjust the stacker extension to the paper size, and then flip out the plate. 4
Stacker
ADF paper chute