Select interface – FUJITSU C150-E146-02EN User Manual
Page 84
7-12
14.Select Interface
1 Press “Next”
or “Previous”
and let
the scanner display the Screen 54.
<Screen 54>
NOTE
The screen 54 will appear oniy when the scannen has proper interface boavds or option boards in the
third party slot.
2 At the Screen 54, press
or
to select
interface type. Press
if you want to
change the setting.
NOTICE
Normally, this setting does not have to be changed.
NOTE
When an appropriate board is installed in the third party slot of the scanner, the scanner automatically
turns off the SCSI interface, activating the board in the third party slot. Screen 54 can be used to
forcibly change the selected interface, the selected interface is forcibly changed.
NOTE
The SCSI interface and the board installed in the third party slot cannot be used at the same time.
NOTE
The default is Auto.
3 Press
to return.