FUJITSU 8000 SERIES - Manual (Page 15)

5
1 Inlet
Connect the power cable.
2 Outlet
Connect the power cable of the display to this outlet.
3 Mouse connector ( : MOUSE)
Connect a mouse.
4 Keyboard connector ( : KEYBOARD)
Connect the keyboard.
5 Parallel connector (PRINTER)
Connect a printer cable to this connector.
6 Serial connector (RS-232C (1))
Connect a cable for an RS-232C-based device (e.g. modem).
7 USB connector
Connect a USB peripheral device.
8 LAN connector
Connect a LAN cable.
9 LINE OUT terminal
A terminal for sound output. Connect the input terminal of audio equipment to this terminal.
When connecting speakers, use those with a built-in amplifier.
10 LINE IN terminal
A terminal for sound input. Connect the output terminal of audio equipment to this terminal.
11 MIC IN terminal
Plug a capacitor microphone to this jack.
12 Serial connector (RS-232C (2))
Connect a cable for an RS-232 C-based device (e.g. modem).
13 CRT connector
Connect the cable of an analog RGB display.
14 Venthole
An opening provided to let heat go out of the PC.
02-DP8 (01-07) 3/2/01, 2:31 PM 5