FUJITSU 8000 SERIES - Manual (Page 17)

7
■ Motherboard
1 2 3
4
5
6
7
8
9
10
11
1 CPU
2 Memory power LED
Lights up when memory power is on.
3 Memory slots
Memory modules are inserted into these slots. These slots are marked RIMM1-RIMM4 in this
order from the left in the figure above.
4 Secondary IDE connector
Connect a CD-ROM drive cable to this connector.
5 Floppy disk drive connector
Connect a floppy disk drive cable to this connector.
6 Primary IDE connector
Connect a cable of the hard disk running OS.
7 Internal battery
This battery is used to save setup values of the PC. The life is about 5 years under normal use.
8 PCI slots
Insert PCI cards. PCI slots, 1 to 5 are arranged in this order from the top in the figure above.
9 CNR connector
Not available with your PC.
10 CD IN connector (black)
Connect an AUDIO cable of CD-ROM drive to this connector.
11 AGP connector
Connect a display card.
02-DP8 (01-07) 3/2/01, 2:31 PM 7