FUJITSU 8000 SERIES User Manual
Page 24
14
■
Connecting the display, keyboard, mouse, and LAN cables
Point
•
This section explains how to connect your display and PC unit so that the display is powered
by the PC unit. In this case, the power cable attached to the display is not used.
•
Use an optional twisted pair LAN cable if required.
1
Connect the power cable to the outlet.
Connect the power cord one end of the power cable (for CRT), which is supplied with the PC unit,
to the outlet of the PC unit.
2
Connect the power cable to the display.
Connect the power cord the other end of the power cable (for CRT), which is supplied with the PC
unit, to the inlet on the back of the display.
3
Connect the keyboard.
With the mark on the connector of the keyboard cable facing right, plug the keyboard connector
to the back of the PC unit as indicated by the keyboard label color on the back.
1
3
4
6
5
2
7
03-DP8 (08-17)
3/2/01, 2:31 PM
14