FUJITSU 8000 SERIES - Manual (Page 62)

52
Point
• When installing a magneto-optical disk drive, fix the attached front access bay panel to the
front panel using the screws.
4 Remove the blank panel from the PC unit.
Remove two screws to remove the panel.
5 Install a front access bay option on the PC unit.
A front access bay option other than the internal hard disk is to be installed so that the front of
the option is aligned with the front panel surface.
Secure the option with the four screws.
To install an internal hard disk, reinstall the blank plate.
08-DP8 (51-56) 3/2/01, 2:32 PM 52