FUJITSU 8000 SERIES - Manual (Page 49)

39
■ Applicable memory modules
To expand the memory, always use Fujitsu-supplied ECC RDRAM RIMM memory modules.
● Memory module combinations
Up to 1,024 megabytes of memory can be installed on the PC.
In the standard configuration, slots RIMM1 and RIMM3 (Bank 1) have RAM modules and slots
RIMM2 and RIMM4 (Bank 2) hold continuity modules (C-RIMMs).
Expansion memory modules must be installed in the slots in one of the combinations shown in
the table below. With a combination not listed in the table, the PC may not operate properly.
■ Location of memory modules
Memory modules are inserted into memory slots inside the PC unit.
RIMM1
RIMM2
RIMM4
RIMM3
RIMM1 RIMM2 RIMM3 RIMM4 Total memory capacity
64 MB C-RIMM 64 MB C-RIMM 128 MB (Standard)
64 MB 64 MB 64 MB 64 MB 256 MB
64 MB 128 MB 64 MB 128 MB 384 MB
64 MB 256 MB 64 MB 256 MB 640 MB
128 MB C-RIMM 128 MB C-RIMM 256 MB
128 MB 128 MB 128 MB 128 MB 512 MB
128 MB 256 MB 128 MB 256 MB 768 MB
256 MB C-RIMM 256 MB C-RIMM 512 MB
256 MB 256 MB 256 MB 256 MB 1024 MB
BANK1
BANK2
06-DP8 (34-42) 3/2/01, 2:32 PM 39