FUJITSU 8000 SERIES - Manual (Page 48)

38
This section explains how to remove or install memory modules. Increasing the memory capacity
increases the amount of data that the system can read at one access, thereby improving the
processing capability of the PC.
Point
• If you want to install a memory module soon after you purchase the PC, set up Windows, turn
off the PC, and then install the memory module.
• The memory module preinstalled in your PC becomes hot when the system is running fast. To
replace or add a memory module, turn off the power switch and unplug the power cord from
the outlet to allow your PC to cool down before doing so.
CAUTION
● Before installing or removing a memory module, turn off the PC and all
devices connected to it, and unplug them.
Otherwise, an electric shock may occur.
● Use Fujitsu-supplied memory modules.
Otherwise, an electric shock, a fire or fault may occur.
WARNING
● When installing or removing a memory module, do not remove screws
other than those specified.
Otherwise, personal injury or faults may occur.
● When assessing the PC board, touch the specified areas only.
Otherwise, personal injury or faults may occur.
3 Increasing the Memory Capacity
06-DP8 (34-42) 3/2/01, 2:32 PM 38