FieldServer FS-8700-40 - Manual (Page 7)

FS-8700-40 SBT FSI Driver Manual Page 7 of 32
FieldServer Technologies 1991 Tarob Court Milpitas, California 95035 USA Web: www.fieldserver.com
Tel: (408) 262 2299 Fax: (408) 262 2269 Toll Free: (888) 509 1970 email: [email protected]
Connector Pinouts for RS-232 Ports
Wire Color
RJ-45 XLS Panel Port 1 (3)
Pin Signal Signal Pin
Brown 1 Rx TXD 2 (7)
White/Orange 8 Tx RXD 1 (6)
Blue/white 4 GND GND 3 (8)
3.3 FSI Connection Notes
It is possible to connect a MXL/XLS device to any RS-232 or RS-485 port. These ports simply need to be
configured for MXL/XLS in the configuration file.
The driver does not support MXL and XLS panels networked together.
One FSI panel may be connected per FieldServer port, but multiple panels may be connected per FSI. The
following diagram illustrates two possible connection configurations.
Configuration 1 – One FSI Panel per FieldServer per port, one Panel per FSI
FSI FSI
Panel Panel
Configuration 2 – One FSI Panel per FieldServer port, 3 panels connected in series to the FSI
FSI
Panel Panel Panel
FieldServer P1
1 8
FieldServer P1
1 8 1 8
P2