Furuno FSV-84 - Manual (Page 30)

2-2
2.2 Wiring
Monitor
(Local supply)
CONTROL UNIT FSV-8401
CONTROL UNIT FSV-8401
MONITOR UNIT
FSV-2400
PROCESSOR UNIT
FSV-8402
HULL UNIT
FSV-8432
(800 mm stroke)
FSV-8442
(1100 mm stroke)
10S2074 (10 m) or 10S2075 (30 m)
10S1258 max.
100 m
Monitor cable
(Local supply)
10S2078 (8 m) *3
100-115/
220-230 VAC
1
φ
, 50/60 Hz
*1
*2: If connector may loosen by
vibration, monitor cable may also
be connected inside.
Clamp in Processor Unit
Transceiver
unit
Monitor unit
Monitor unit
Control unit
Control unit
External
monitor
220 VAC
3
φ
, 50/60 Hz
10S2076 (10 m)
10S2076 (10 m)
DPYCY-1.5
TPYCY-4
FSV-84
FSV-84
DPYCYS-2.5
Hull Unit Control Box
(Separate installation
available with FSV-846
(option)).
*1 With monitor unit
100/110/115/ 220/230 VAC
1 φ , 50/60 Hz
*1 No monitor unit
*1 Choose one
*3 To connect cable 10S2078, connect the end where the peeled portion is
longer to the transceiver unit and connect the other end to the hull unit.
Cables shown are JIS cables.
If not available, use equivalent.
See cross section diagrams of
cables in this section for cable
construction.
10S2320 (5 m)
TRANSCEIVER UNIT
FSV-841A
Optional supply
Wiring