Furuno FSV-84 - Manual (Page 54)

3-6
3.3 Configuring Own Ship Mark
Set own ship’s dimensions and the location of the transducer to accurately display the own
ship mark on the display.
1. Press the [MENU] key to display the SYSTEM menu.
QUIT
INTERFACE SETTING...
EXT DATA SETTING...
OWN SHIP MARK...
TEST&INITIALIZATION...
TX/RX SETTING...
TX/RX SETTING-H...
TX/RX SETTING-V...
OTHERS...
SYSTEM MENU
System menu
2. Use the trackball to choose OWN SHIP MARK and press the [MENU] key.
MENU QUIT
QUIT OWN SHIP MARK
SHIP'S LENGTH : 75m
SHIP'S WIDTH : 20m
TD POSITION 1 : 15m
TD POSITION 2 : 0.0m
OWN SHIP MARK menu
3. Use the trackball to choose SHIP’S LENGTH.
4. Press the [MENU] key to show the setting window.
MENU QUIT
QUIT OWN SHIP MARK
QUIT
CANCEL
SHIP'S LENGTH : 75m
SHIP'S WIDTH : 20m
TD POSITION 1 : 15m
TD POSITION 2 : 0.0m
OWN SHIP MARK menu, setting window