Furuno FSV-84 - Manual (Page 50)

3-2
4. Choose YES and press the [MENU] key.
OTHERS
MENU QUIT
QUIT
QUIT
MARK DISPLAY...
MARK SIZE...
DATA DISPLAY...
CURRENT VEC & WIND...
NET SONDE SETTING...
NET SHOOT SETTING...
TARGET LOCK...
STABILIZATION...
TEST...
INITIALIZATION...
INITIAL SETTING
INITIAL SETTING menu
5. Choose TEST and press the [MENU] key.
INITIAL SETTING
OTHERS
MENU QUIT
QUIT
BOARD TEST...
PANEL TEST...
TEST PATTERN...
RX TEST...
NOISE TEST...
TX : OFF
QUIT
QUIT TEST
TEST menu
6. Choose TX and press the [MENU] key.
7. Choose ON and press the [MENU] key.
8. Choose QUIT at the top of the menu and press the [MENU] key.
How to check the hull unit
1. Press the POWER (
|) switch on the control unit to turn on the equipment. Confirm that
“ ON” lamp above the POWER switch and the
ª
switch light.
Transducer switches of the control unit
2. Confirm that the 5V and UP lamps on the raise/lower control box are lit.