Furuno FSV-84 - Manual (Page 59)

3-11
3.4.3 OTHERS menu
MENU QUIT
QUIT OTHERS
LANGUAGE : English
HEADING ADJUST1 : 0
HEADING ADJUST2 : 0
PROPELLER DIREC : -180
ES2 SELECT : ES
ES DRAFT OFFSET : 0.0m
EVENT KEY : EVENT
AUTO TILT : NARROW
SELECT USER PROG :H/V INTERLOCK
TRACKBALL SPEED : NORMAL
HULL UNIT STROKE : 800m
TD TYPE : NON-DOME
OTHERS menu
LANGUAGE: Choose the language to use. (JAPANESE, ENGLISH)
HEADING ADJUST1: See “3.2 Heading Adjustment”.
HEADING ADJUST2: Compensate for installation error in motion sensor (in hull unit) or
satellite compass, in bow direction. (-180 to 179(°)).
PROPELLER DIREC: Set bow reference bearing for screw as viewed from transducer
position. This is for suppressing screw noise, by specifying screw bearing. (-180 to 179(°)).
ES2 SELECT: Choose the equipment connected to the ES2 port; echo sounder or net
recorder. (ES, NET REC)
ES DRAFT OFFSET: When connecting an echosounder, you may enter the ship’s draft if
you prefer to display depth from the draft rather than depth from the transducer. (0.0 m to
10.0 m, increments of 0.1 m)
EVENT KEY: Choose the key to use to enter own ship’s position, EVENT or SHOOT. When
choosing SHOOT, the shoot function becomes inoperative. (EVENT, SHOOT)
AUTO TILT: Choose the range for the auto tilt form WIDE (±2 to 10°, ±4 to 16°, ±6 to 20°) or
NARROW (±1 to 4°, ±2 to 6°, ±3 to 8°). (WIDE, NARROW)
SELECT USER PROG: Choose whether to program horizontal and vertical displays
together or individually, by the USER PROG control. H/V INTERLOCK, the default setting,
commonly applies control settings to the horizontal and vertical displays. H/V INDVIDUAL
enables individual adjustment of horizontal and vertical displays.