Frymaster cm45 s User Manual

Page 10

Advertising
background image

CM4-S Cooking Computer — Programming with Filtration

3-4

52. Press

.

53. Segment appears in left display; Prod 1 in right

54. Press product button 4

.

55. Cooktime appears in left display; 0 appears in the

right.

56. Subtract desired time for second cook segment from

remaining cooktime. (See example at right.) Enter that
number at the cooktime prompt.

57. Press

to lock in cooktime .

58. Set-Temp appears in left display and 0 or a

previously programmed temperature appears in the right.

59. Use product keys to enter the cooking temperature for the final

temperature change.

60. Press

. Sens appears in the left display; 0 or a previously

set sensitivity setting appears in the right.

61. Use product keys to enter sensitivity.

62. Press

.

63. Segment appears in left display; Prod 1 in right. All

programmed buttons are illuminated.

64. Nine minutes of the 13-minute cooktime have been programmed.

No additional programming is required. The computer will take the
oil to the last setpoint, which was established in step 58 and
countdown the remaining 4 minutes.

65. Press

to leave programming for this product button.

66. Product appears in the left display. Right display is blank.
67. Press next product button to be programmed with segmented

cooking cycles. Follow steps outlined above to program.

68. To lock in programming and exit, press

.

7:00

-3:00

4:00

Remaining
cooktime

Cooktime
for 3rd
segment

Time entered into
CM4-S.

Advertising