Frymaster cm45 s - Manual (Page 9)

CM4-S Cooking Computer — Programming with Filtration
3-3
33. Press to lock in choice.
34. Segment appears in left display; Prod 1 in right. The LED
in the product button 1 continues to flash. All others are dark.
35. Press product button 2 . The LED in product button 2 flashes.
The LED in the button being programmed is illuminated
continuously.
36. Determine the desired cooktime for the first cook cycle. Subtract
that number from the total cooktime entered
in the first step. Enter the result with the
product buttons. See calculation at right and
graphic in programming overview on page 1-
1.
37. Press to lock in choice.
38. Set-Temp appears in left display and 0
or a previously programmed temperature
appears in the right.
39. Use product keys to enter the cooking temperature for the first
temperature change. See graphic on page 1-1.
40. Press . Sens appears in the left display; 0 or a previously
set sensitivity setting appears in the right.
41. Use product keys to enter sensitivity.
42. Press .
43. Segment appears in left display; Prod 1 in right.
44. Press product button 3 .
45. Cooktime appears in left display; 0 appears in the
right.
46. Subtract desired time for second cook segment from
remaining cooktime. (See example at right.) Enter that
number at the cooktime prompt.
47. Press to lock in cooktime .
48. Set-Temp appears in left display and 0 or a
previously programmed temperature appears in the right.
49. Use product keys to enter the cooking temperature for the second
temperature change.
50. Press . Sens appears in the left display; 0 or a previously
set sensitivity setting appears in the right.
51. Use product keys to enter sensitivity.
13:00
-2:00
11:00
Total cooking time
Cooktime for 1 st
segment
Time entered into
CM4-S.
11:00
-4:00
7:00
Remaining
cooktime
Cooktime
for 2nd
segment
Time entered into
CM4-S.