Frymaster cm45 s - Manual (Page 20)

CM4-S Cooking Computer — Alarm Programming
5-1
1. B
e
g
i
n
h
e
r
e
a
f
t
e
r
r
e
a
c
h
i
n
g
1. After reaching the first display of Segment on the computer
when programing for any mode of operation, follow these steps to
set audible alarms in the cook cycle.
2. Segment is shown in the left display; Product and its
number in the right. Press hidden program button (see diagram on
page 2-2).
3. Alarm 1 appears in left display; A or M and a time appears in
the right.
4. Determine the point in the cooktime countdown the first alarm
should occur. For example, to set an alarm two minutes into a 13-
minute cook cycle, set the alarm at 11:00, the time the computer
will display when two minutes have elapsed in the cook cycle. (See
graphic above).
5. Use to toggle between A and M. With A displayed, alarms are
self-canceling; with M displayed, alarms must be canceled
manually. See example on next page of entering three alarm times.
6. With desired time and alarm-canceling mode displayed, press
to proceed. Skip to step 9 to program Alarm 2. To exit alarm
programming follow steps 7-8.
P rogramming
Hint
Alarms are set to
remind operators
to shake fry
baskets or tend to
the product in
some other way at
points during the
cook cycle. The
instructions at right
detail setting three
alarms in a 13-
minute cook cycle.
To enter a single
alarm, exit the
sequence after
setting the first
alarm.
2:00
1:
2:
3:
11:00
6:00
Three alarms can be programmed for a cook cycle. The CM4-S counts down cook times from
the total time to zero. Alarms are entered at the point in the countdown they are desired. The
example below is for alarms at 11:00, 6:00 and 2:00 on the countdown clock; the alarms will
occur two, seven and 11 minutes into the 13-minute cook cycle.
At the Alarm 1
prompt, enter
11:00. The alarm
will occur with 11
minutes remaining
in the cook cycle;
two minutes have
passed.
At the Alarm 2 prompt,
enter 6:00, The alarm will
occur with 6:00 remaining
in the cook cycle; seven
minutes have passed.
At the Alarm 3
prompt, enter 2:00.
The alarm will
occur with 2:00
remaining in the
cook cycle; 11
minutes have
passed.
2:00 7:00 11:00
Cook
cycle
ends
Points in the cook cycle the alarms occur
13:00