Preface – FUJITSU PCI Gigabit Ethernet 4.1 Update 2/ 5.0 for Oracle Solaris C120-E276-11ENZ0(A) User Manual
Page 2
Preface
Purpose
This manual describes how to install the Gigabit Ethernet card into your SPARC Enterprise system, and configure the environmental
settings for the interface.
Target Reader
This manual is intended for system administrators responsible for installing the Gigabit Ethernet card.
To understand the concepts and procedures presented in this manual, you need a few years of experience in Oracle Solaris (in this manual,
abbreviated to Solaris) system administration and have a basic knowledge of networked systems.
Organization
This section describes how this manual is organized.
Chapter 1 describes the distinctive features of the Gigabit Ethernet Card.
Chapter 2 Gigabit Ethernet Card Installation
Chapter 2 describes how to install the Gigabit Ethernet card.
Chapter 3 Setting Instructions
Chapter 3 provides an overview of the environment definition.
Chapter 4 LinkAggregation Feature
Chapter 4 describes how to use the LinkAggregation function.
Chapter 5 provides information about how to troubleshoot and resolve problems you might encounter during installation.
Appendix A explains the messages output by the driver software.
Appendix B Gigabit Ethernet Card LED Diagnosis
Appendix B explains details of the Gigabit Ethernet card LED diagnostics.
Appendix C Using FUJITSU PCI GigabitEthernet in a Cluster Environment
Appendix C describes notes when using the card in a Cluster System.
Appendix D Using FUJITSU PCI GigabitEthernet in Solaris Containers
Appendix D describes notes when using the card in Solaris Containers.
Appendix E Using FUJITSU PCI GigabitEthernet in Oracle VM Server for SPARC
Appendix E describes notes when using the card in Oracle VM Server for SPARC.
Appendix F Using FUJITSU PCI GigabitEthernet in Solaris 11 Network Virtualization
Appendix F describes notes when using the card in Solaris 11 Network Virtualization.
Appendix G PCI Slot Number and Device Name
Appendix G shows the PCI slot number and device name list for each SPARC Enterprise model.
Symbol
The following symbols are used in this manual:
- i -