FUJITSU PCI Gigabit Ethernet 4.1 Update 2/ 5.0 for Oracle Solaris C120-E276-11ENZ0(A) - Manual (Page 39)

Propertiy Status Meaning
adv_autoneg_cap Read and write
Auto-Negotiation Setting
0: Auto-Negotiation Off (Forced mode)
1: Auto-Negotiation On (default)
mtu (*1) Read and write
MTU (byte) Setting
1500 to 9000 (default: 1500)
flowctrl Read and write
Flow_Control Setting
no: None (flow_control disabled)
tx: Local Send (Can transmit pause frame only)
rx: Remote Send (Can receive pause frame only)
bi: Symmetric (Can receive and transmit pause frame)
pfc: Priority-base (Can receive and transmit pause frame includeing
thr priority value) (not supported)
auto: Auto (mode is dynamically determined) (not supported)
adv_10fdx_cap Read only
10Mbps/FullDuplex Actual Setting
0: Disabled
1: Enabled
en_10fdx_cap Read and write
10Mbps/FullDuplex Setting
0: Disabled
1: Enabled (default)
adv_10hdx_cap Read only
10Mbps/HalfDuplex Actual Setting
0: Disabled
1: Enabled
en_10hdx_cap Read and write
10Mbps/HalfDuplex Setting
0: Disabled
1: Enabled (default)
adv_100fdx_cap Read only
100Mbps/FullDuplex Actual Setting
0: Disabled
1: Enabled
en_100fdx_cap Read and write
100Mbps/FullDuplex Setting
0: Disabled
1: Enabled (default)
adv_100hdx_cap Read only
100Mbps/HalfDuplex Actual Setting
0: Disabled
1: Enabled
en_100hdx_cap Read and write
100Mbps/HalfDuplex Setting
0: Disabled
1: Enabled (default)
adv_1000fdx_cap Read only
1000Mbps/FullDuplex Actual Setting
0: Disabled
1: Enabled
en_1000fdx_cap Read and write
1000Mbps/FullDuplex Setting
0: Disabled
1: Enabled (default)
adv_1000hdx_cap Read only
1000Mbps/HalfDuplex Actual Setting
0: Disabled
1: Enabled
en_1000hdx_cap Read and write
1000Mbps/HalfDuplex Setting
0: Disabled
1: Enabled (default)
- 33 -