FUJITSU PCI Gigabit Ethernet 4.1 Update 2/ 5.0 for Oracle Solaris C120-E276-11ENZ0(A) - Manual (Page 73)

Appendix D Using FUJITSU PCI GigabitEthernet in Solaris
Containers
This Appendix outlines the supported functions and setup procedure for the FUJITSU PCI GigabitEthernet 4.1 or later or the FUJITSU
PCI GigabitEthernet 5.0 or later interface when used in Solaris Containers.
D.1 Solaris Containers Support
The FUJITSU PCI GigabitEthernet 4.1 or later or the FUJITSU PCI GigabitEthernet 5.0 or later driver supports the following features in
Solaris Containers.
- Global Zone
- Non-Global Zones(Shared-IP Non-Global Zones and Exclusive-IP Non-Global Zones)
Note: Shared-IP Non-Global Zones are available in Solaris 10 3/05 or later.
Exclusive-IP Non-Global Zones are available in Solaris 10 8/07 or later.
D.2 Solaris Containers Setup Procedure
Setup the Solaris Containers environment. For more information about the Solaris Containers environment, please refer to "System
Administration Guide: Solaris Containers-Resource Management and Solaris Zones" of Oracle Documentation.
The examples below show the setting methods for Shared-IP Non-Global Zones and Exclusive-IP Non-Global Zones.
- The following example shows how to add an interface to a Shared-IP Non-Global Zone (zonecfg add net)
zonecfg -z zonename (Specify Zone Name.)
zonecfg:zonename> set ip-type=shared (Specify Shared-IP Non-Global Zone.)
- 67 -