FUJITSU PCI Gigabit Ethernet 4.1 Update 2/ 5.0 for Oracle Solaris C120-E276-11ENZ0(A) - Manual (Page 8)

The GLDv3 compliant driver works with the following features.
- The LinkAggregation (based on IEEE 802.3) by the dladm(1M) command.
- Solaris Containers (Exclusive-IP Non-Global Zones)
- Oracle VM Server for SPARC
The GLDv3 compliant driver does not work with the following features.
- SNA/FNA
- The Multipath Function of PRIMECLUSTER GLS.
The following feature was changed.
- Set instance number by ndd(1M) command.
Solaris 11 Network Virtualization
New features, Vanity Naming and Environment Setting by ipadm(1M) command, are introduced into Solaris 11. In addition, dladm(1M)
command and Network Virtualization are extended and New flowadm(1M) command controlled network flow is provided. FUJITSU PCI
GigabitEthernet 5.0 or later works with the following features.
- Vanity Naming.
- Environment Setting by ipadm(1M) command.
- VLAN by dladm(1M) command.
- VNIC by dladm(1M) command.
- Operation Mode Setup by dladm(1M) command.
- Flow by flowadm(1M) command.
The following feature was changed.
- Configuration of the LinkAggregation feature by the dladm(1M) command.
1.2 Gigabit Ethernet Card Specifications
The Gigabit Ethernet card is an adapter that is installed into a PCI Express slot.
1.2.1 Specifications
The specifications of the GigabitEthernet cards are listed in " Table 1.2 PCI Gigabit Ethernet Card Specification ".
Table 1.2 PCI Gigabit Ethernet Card Specification
Item Hardware Specification
Host Bus Interface
PCI Express 1.0a (SE0X7GD1X, SE0X7GD2X)
PCI Express 1.1 (SE0X7GQ1X, SE0X7GQ2X)
Network Interface
1000Base-SX * 2ports (SE0X7GD2X)
10/100/1000Base-T * 2ports (SE0X7GD1X)
10/100/1000Base-T * 4ports (SE0X7GQ1X, SE0X7GQ2X)
Host Data Transfer
SE0X7GD1X, SE0X7GD2X, SE0X7GQ2X: PCI Express 4lane Bus Mastering DMA
Transfers
SE0X7GQ1X: PCI Express 8lane Bus Mastering DMA Transfers
Bus Type One PCI Express slot per card.
- 2 -