FUJITSU PCI Gigabit Ethernet 4.1 Update 2/ 5.0 for Oracle Solaris C120-E276-11ENZ0(A) - Manual (Page 59)

- Solaris 10 8/07 or later
- The following example shows how to remove the interface "fjgi2" from the "key=1" LinkAggregation Group:
# /usr/sbin/dladm remove-aggr -d fjgi2 1
- Solaris 11
- The following example shows how to remove the interface "fjgi2"(this vanity name is net4) from the "aggr-link=aggr1"
LinkAggregation Group:
# /usr/sbin/dladm remove-aggr -l net4 aggr1
Note
- If the LACP mode is off, do not use this command.
- After rebooting the system, the LinkAggregation settings remain effective.
- For more information about this command, please refer to the "man pages section 1M: System Administration Commands" of Oracle
Documentation.
4.2.1.6 Display LinkAggregation Statistics and Information (dladm show-aggr)
This section explains the dladm show-aggr command for displaying statistics and information for LinkAggregation Groups.
- 53 -