FUJITSU M3000 - Manual (Page 28)

2-2 SPARC Enterprise M3000 Server Installation Guide • January 2009
■ Be careful not to allow the ambient temperature to rise sharply in winter. Such a
sudden temperature change would cause condensation to form inside the server.
Allow for a sufficient warm-up period prior to operation.
■ Do not install the server near a copy machine, air conditioner, welding machine,
or any other loud equipment.
■ Do not install the server near any equipment generating lots of electronic noise.
■ Do not install the server on the same circuit as devices, such as equipment
elevators, that can cause voltage sags when it is started.
■ Take measures to prevent static electricity from being generated at the installation
location.
■ Confirm that the supply voltage and frequency match the electrical ratings
indicated on the server.
■ Do not insert anything into any opening in the server. The server contains
high-voltage parts. If a metal object or another conductor were inserted into an
opening in the equipment, it could cause a short circuit that may result in fire,
electric shock, or equipment damage.
■ For details on maintenance of the server, contact a certified service engineer.
2.2 Before Installing the Server
Before installing the server, you must know the system configuration and obtain all
the prerequisite information for system installation. For details, refer to the SPARC
Enterprise M3000 Server Site Planning Guide.
2.2.1 Checking the Environmental Requirements
This section describes the ambient environmental requirements for server
installation.