FUJITSU M3000 - Manual (Page 36)

3-2 SPARC Enterprise M3000 Server Installation Guide • January 2009
2. Check for a model name and configuration on the product test record.
If any of the items on the list of attachment or the product test record are missing,
incorrect, or damaged, contact your sales representative.
3.2 Mounting the Server in the Equipment
Rack
The SPARC Enterprise M3000 server is mounted in the equipment rack for use. For
the mounting procedure, refer to the SPARC Enterprise Equipment Rack Mounting
Guide.
Caution – Do not grab the handle on the front of the server to lift the server. This
handle should be used only to insert the server into or pull it out from the
equipment rack (referred to as the rack). The handle is not designed to support the
weight of the server.
3.3 Connecting Cables
This section explains how to connect power cables and the administration console.
3.3.1 Connecting Power Cables
This server is shipped with a grounded type (three-wire type) of power cable.
Always connect the power cables into grounded power outlets.
Caution – The server is designed to work with power systems having a grounded
neutral conductor. Do not connect the equipment into any other type of power
system. Contact the facilities manager or a qualified electrician to determine what
type of power is supplied to your building.