A.2 operator panel overview, Operator panel overview, Section a.2, “operator panel overview – FUJITSU M3000 User Manual
Page 60
A-4
SPARC Enterprise M3000 Server Installation Guide • January 2009
A.2
Operator Panel Overview
If no network connection is available, the operator panel is used to start or stop the
system. The operator panel has three LED status indicators, a power button, and a
mode switch (key switch). The panel is located at the center on the front of the
server.
While the system is running, the Power LED and the XSCF STANDBY LED (green)
should be on, and the CHECK LED (orange) should not be on. If the CHECK LED
is on, search the system logs to determine what is wrong.
The three LED status indicators on the operator panel show the following:
■
General system status
■
System problem warning
1-c
DC-DC converter
*
2
Memory slot
DIMM (MEM#00A)
3
Memory slot
DIMM (MEM#00B)
4
Memory slot
DIMM (MEM#01A)
5
Memory slot
DIMM (MEM#01B)
6
Fan unit
FAN_A#0
7
Fan unit
FAN_A#1
8
PCIe slot
PCI#0
9
PCIe slot
PCI#1
10
PCIe slot
PCI#2
11
PCIe slot
PCI#3
12
Power supply unit
PSU#0
13
Power supply unit
PSU#1
14
Memory slot
DIMM (MEM#02A)
15
Memory slot
DIMM (MEM#02B)
16
Memory slot
DIMM (MEM#03A)
17
Memory slot
DIMM (MEM#03B)
* These components are fixed to the motherboard unit.
† MBU_A has a CPU consisting of four-core processors and MBU_A_2 has a CPU consisting of two-core processors.
Location number
Name
Abbreviation