Frymaster H17 - Manual (Page 11)

1-7
5. Remove the element mounting-screws and
pull the element out of the frypot (split-vats).
On full-vat elements, remove the element
clamps and hardware before removing
mounting-screws and nuts on the defective
element.
6. Install the replacement element in the frypot
and secure with the mounting screws
removed in Step 5.
7. Re-install the temperature probe and probe-
securing components onto the replacement
element.
8. Route the element leads (terminals) to the
rear of the fryer. Ensure that chafing guards
are in place to prevent wire chafing while
raising and lowering elements.
Front
Back
Element mounting-screws and nuts. (Inset Photo-
back of tilt plate)
Proper element-wire routing is essential to prevent
wire chafing while raising and lowering elements.
Chafing guards on cabinet edges also help prevent
wire chafing while raising and lowering elements.