Frymaster H17 - Manual (Page 2)

NOTICE
IF, DURING THE WARRANTY PERIOD, THE CUSTOMER USES A PART FOR THIS
ENODIS EQUIPMENT OTHER THAN AN UNMODIFIED NEW OR RECYCLED PART
PURCHASED DIRECTLY FROM FRYMASTER/DEAN, OR ANY OF ITS AUTHORIZED
SERVICE CENTERS, AND/OR THE PART BEING USED IS MODIFIED FROM ITS
ORIGINAL CONFIGURATION, THIS WARRANTY WILL BE VOID. FURTHER,
FRYMASTER/DEAN AND ITS AFFILIATES WILL NOT BE LIABLE FOR ANY
CLAIMS, DAMAGES OR EXPENSES INCURRED BY THE CUSTOMER WHICH
ARISE DIRECTLY OR INDIRECTLY, IN WHOLE OR IN PART, DUE TO THE
INSTALLATION OF ANY MODIFIED PART AND/OR PART RECEIVED FROM AN
UNAUTHORIZED SERVICE CENTER.
DANGER
Copper wire suitable for at least 167°F (75°C) MUST be used for power
connections.
DANGER
The electrical power supply for this appliance MUST be the same as
indicated on the rating and serial number plate located on the inside of the
fryer door.
DANGER
This appliance MUST be connected to the voltage and phase as specified
on the rating and serial number plate located on the inside of the fryer
door.
DANGER
All wiring connections for this appliance MUST be made in accordance
with the wiring diagrams furnished with the equipment. Wiring diagrams
are located on the inside of the fryer door.
DANGER
Do not store or use gasoline or other flammable vapors and liquids in the
vicinity of this or any other appliance.
WARNING
Do not attach accessories to this fryer unless fryer is secured from tipping.
Personal injury may result.
WARNING
Frymaster fryers equipped with legs are for permanent installations. Fryers
fitted with legs must be lifted during movement to avoid damage and
possible bodily injury. For a moveable or portable installation, Frymaster
optional equipment casters must be used.
Questions? Call 1-800-551-8633