Frymaster H52 Series - Manual (Page 23)

3–10
For the right side of a split-vat or for a full-vat: Press the right 1 switch to go UP a degree
(maximum of 5 for Fahrenheit or 3 for Celsius). Press the right 2 switch to go DOWN a degree
(maximum of 5 for Fahrenheit or 3 for Celsius).
5. Press the switch to save the settings.
6. Press either ON/OFF switch to exit the setup mode. Both displays will change to OFF.
How to Activate or Deactivate the Frypot BOIL-OUT Feature
1. Enter the setup mode. See How to Enter the Setup Mode on Page 3-8.
2. Press and release the switch until BOIL-OUT appears in the display.
3. Press the right
1
or
2
switch to toggle the boil-out mode ON or OFF.
4. Press the switch to save the settings.
5. Press either ON/OFF switch to exit the setup mode. Both displays will change to OFF.
3.6.2 M-100B™ Computer Programming Mode
How to Enter the Program Mode
1. Press the ON/OFF switches until both displays of cooking computer indicate OFF . Press the
left product selection switch and the left
1
and
2
cook switches simultaneously. Release all
three switches at the same time.
2. When the program mode has been entered, the display will flash M-100B computer
briefly, followed by the software version number. After a few seconds, Fr fries yes or
Fr fries no will be displayed, depending upon previous program settings.
How to Reset the Computer to the Factory Defaults
While in the program mode, press all 4 cook switches (left and right
1
and
2
) simultaneously to reset
the computer to the factory defaults. See How to Enter the Program Mode above. Updating
menu will flash in the display, followed by epra cleared and cooks cleared .
After a few seconds, Fr fries yes will be displayed, indicating that the computer has been
reset to the factory defaults.
How to Change the Shake, Pull, Or Quality Times for Menu Items
1. Enter the program mode. (See How to Enter the Program Mode above.)
2. Press and release the switch until the product to be changed appears in the left display.