Frymaster H52 Series - Manual (Page 40)

6-1
CHAPTER 6: PREVENTIVE MAINTENANCE AND TROUBLESHOOTING
6.1 Preventive Maintenance
Preventive Maintenance (PM) procedures are contained in McDonald’s Preventive Maintenance
System Maintenance Requirement Cards (MRC) 12, 14, 14A, and 15. The cards are distributed with
this manual, but are not an integral part of the manual. A replacement card set may be ordered using
part number 819-5432. To order both the card set and the Operator’s Manual, use part number 819-
5404.
6.2 Troubleshooting
This section provides an easy reference guide to some of the common problems that may occur
during the operation of this equipment. The troubleshooting guides that follow are intended to help
correct, or at least accurately diagnose, problems with this equipment. Although the chapter covers
the most common problems reported, you may encounter problems that are not covered. In such
instances, the Frymaster Technical Services staff will make every effort to help you identify and
resolve the problem.
When troubleshooting a problem, always use a process of elimination starting with the simplest
solution and working through to the most complex. Never overlook the obvious – anyone can forget
to plug in a cord or fail to close a valve completely. Most importantly, always try to establish a clear
idea of why a problem has occurred. Part of any corrective action involves taking steps to ensure
that it doesn’t happen again. If a controller malfunctions because of a poor connection, check all
other connections, too. If a fuse continues to blow, find out why. Always keep in mind that failure
of a small component may often be indicative of potential failure or incorrect functioning of a more
important component or system.
Before calling a service agent or the Frymaster HOTLINE (1-800-24FRYER):
• Verify that electrical cords are securely plugged in.
• Verify that circuit breakers are on.
• Verify that frypot drain valves are fully closed.
DANGER
Never attempt to move a fryer containing hot cooking oil or to transfer hot cooking
oil from one container to another.
DANGER
Use extreme care when testing electrical circuits. Live circuits will be exposed.
WARNING
Inspection, testing, and repair of electrical equipment should be performed only by
qualified service personnel. The equipment should be unplugged when servicing,
except when electrical tests are required.