1 disposal for non-bulk oil systems – Frymaster 14 Series User Manual

Page 34

Advertising
background image

4-16

5. With

assign btn displayed on the left and the

chosen product (ex.

wings) displayed on the right,

press and hold for three seconds a button between 1-0 to
assign the product. The LED in the chosen product button
will illuminate (see Figure 53). To unassign a product
from a button, press and hold the button assigned to that
product for three seconds. The LED no longer
illuminates.

Figure 53

6. Once the button is assigned, press the

u (INFO) button (see Figure 54) to save

the assigned button.

The computer displays

name on the left with the product (ex. WINGS) on the

right.

7. If no further programming is necessary, press the (2) button (see Figure 55)

twice to return to

Level 1 program changing to the Product

selection prompt.


8. Press the (2) button again (see Figure 55) to quit and to return to

OFF.

Figure 54


Figure 55


4.10.4 Draining and Refilling Vats, and Disposing of Oil

When cooking oil is exhausted, drain the oil into an appropriate container for transport to the
disposal container. Frymaster recommends a McDonald’s Shortening Disposal Unit (MSDU). Do
not drain deep clean (boil-out) solution into an MSDU
. NOTE: If using an MSDU built
before January 2004 the filter pan cover must be removed to allow the unit to be positioned beneath
the drain. To remove the cover, lift up on the front edge and pull it straight out of the cabinet. Refer
to the documentation furnished with your disposal unit for specific operating instructions. If a
shortening disposal unit is not available, allow the oil to cool to 100°F (38°C), then drain the oil into
a METAL container with a capacity of FOUR gallons (15 liters) or larger to prevent oil from
spilling.


4.10.4.1 Disposal for Non-Bulk Oil Systems

This option is used to dispose of old oil into either an MSDU or a METAL pot.

1. Remove the filter pan and position the MSDU or METAL container with a capacity of FOUR

gallons (15 liters) or larger under the fryer to drain the oil.

2. With the computer

OFF, press and hold the FLTR button (see Figure 56) of

the corresponding vat for three seconds; a chirp sounds

Figure 56

The computer displays

filter menu for three seconds, changing to Auto Filter.

Advertising