Frymaster 14 Series - Manual (Page 69)

5-10
The computer displays polish alternating with yes no.
9. Press the 9 (1
yes) button to continue (see Figure 22).
The filter pump turns on. The drain and return valves are open and oil is
pumped through the frypot. The computer displays
STOP POLISH and
a five minute countdown timer. When the timer expires, the filter pump
shuts off.
The computer displays
fill vat alternating with yes no.
10. Press the 9 ( YES) button to continue (see Figure 23).
The drain valve closes and the filter pump turns on and refills the frypot. As
the frypot fills, bubbles appear, the return valve closes and the pump shuts
off. Once the system verifies the oil level, the top off pump will add oil if
necessary.
The computer displays
is pot filled alternating with yes no.
11. Press the 9 ( YES) button (see Figure 24) if the pot is filled to continue,
otherwise press the 8 (2 NO) button (see Figure 21) to run the pump
again ending with the computer displaying is pot filled
alternating with yes no again.
Figure 22
Figure 23
Figure 24
The computer will verify the oil temperature and turn on the heat source if needed. The computer
will display
low temp until the setpoint is reached.
Once setpoint is reached, the computer displays the product or dashed lines and is ready to resume
cooking.
Note: Cooking cannot start until low temp display changes to product or dashed lines.